Fluke 753 Fluke 750 Series User Manual - Page 36
Preserve Battery Life, The Battery Charger, Battery Save - model
View all Fluke 753 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
753/754 Users Manual Preserve Battery Life An optional Auto Battery Save feature turns the Product off after a selected set idle time. The default setting for Auto Battery Save is Off. The setting is kept after the Product power is off. Auto Battery Save operates the same when the battery charger is used. To turn on the Auto Battery Save feature: 1. Push s. 2. Push to highlight Off that follows Auto Battery Save. 3. Push or the Choices softkey. 4. Push to highlight On, then push . 5. To use the timeout period shown on the display, stop here. Push the Done softkey to exit Setup mode and do not go on to step 6. 6. If you wish to change the timeout period, push to select the timeout period following Battery Save Timeout. 7. Push or the Choices softkey. 8. Record choice of timeout period in minutes (accepted range: 1 to 120 minutes). 9. Push the Done softkey. 10. Push the Done softkey or s to exit Setup mode. 24 The Battery Charger Caution To avoid damage to the Product, use only the Battery that comes with the Product, Fluke model BP7240, part number 4022220. Where ac power is available, the battery charger can be used to conserve battery power and energize the Product. When the battery is in the Product, the battery charges only when the Product is off. When you calibrate an instrument, best results come from battery power use. An optional 12-V car adapter is available that can be used to charge the battery outside of the Product. See "Accessories".