Fluke TIS20-9Hz User Manual - Page 34
Color Alarms, Image, Fusion
View all Fluke TIS20-9Hz manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TiS10, TiS20, TiS40, TiS45, TiS50, TiS55, TiS60, TiS65 Users Manual To set the IR-Fusion mode: 1. Push 2. 2. Push W/X to highlight Image. 3. Push 1 or Z to view the menu. 4. Push W/X to highlight IR-Fusion. 5. Push 1 or Z to view the menu. 6. Push W/X to highlight an option. 7. Push: • 1 to set the change and go back to the live view. • 2 or Y to set the change and go back to the previous menu. • 3 to cancel the change and go back to the live view. Color Alarms The Imager has apparent temperature color alarms. The type of available alarm depends on the model. Model: Hi-Lo Alarm: TiS60, TiS65, TiS50, TiS55 yes TiS40, TiS45 yes TiS10, TiS20 not available Isotherm Alarm: yes not available not available The high-temperature color alarm shows a full visible image and only shows infrared information on objects or areas that are above the set apparent temperature alarm level. The low-temperature (or dew point) color alarm shows a full visible image and only shows infrared information on objects or areas that are below the set apparent temperature (or set dew point) color alarm level. The user must manually determine and set these parameters. Note The Imager does not sense ambient or surface dew point level automatically. To use the lowtemperature color alarm function as a dew point color alarm, manual determination and input of surface dew point temperature will yield the best results. Depending on the situation, the colors presented may help identify areas of concern with possible dew point condensation. To view the Color Alarm menu: 1. Push 2. 2. Push W/X to highlight Image. 3. Push 1 or Z to view the menu. 4. Push W/X to highlight Color Alarm. 5. Push 1 or Z to view the menu. 24