Garmin GPSMAP 2206 Owner's Manual - Page 12
Turning on the GPSMAP 2206/2210, Adjusting the Backlight
UPC - 753759053024
View all Garmin GPSMAP 2206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Getting Started > Turning on the GPSMAP 2206/2210 Turning on the GPSMAP 2206/2210 Before you turn on the GPSMAP 2206/2210, make sure the unit and GPS 17 antenna are correctly installed on your vessel according to the instructions in the GPSMAP 2206/2210 & GPS 17 Installation Instructions. The first time you turn on the GPSMAP 2206/2210, the GPS 17 receiver must collect satellite data and determine its current location. To ensure proper initialization, the GPSMAP 2206/2210 is shipped from the factory in AutoLocate mode. To turn on the GPSMAP 2206/2210: 1. Press and hold the POWER key until the unit turns on. 2. When I Agree is highlighted on the Warning Page, press ENTER to open the Map Page. To turn off the GPSMAP 2206/2210: Press and hold the POWER key until the unit turns off. Adjusting the Backlight You can adjust the screen backlighting on the GPSMAP 2206/2210 from any page by using the POWER/BACKLIGHT key. To adjust the backlight level: 1. Press and release the POWER/BACKLIGHT key. 2. Press up on the ROCKER to increase the brightness, or press down to decrease. TIP: After you open the Backlight adjustment window, press the POWER/BACKLIGHT key repeatedly to cycle through the three backlight settings: Highest, Middle, and Lowest. Note: The first time you turn on the unit, you are asked if you want to start the retail demonstration. Select No, and press ENTER. Highest Middle Lowest 3. Press ENTER or QUIT to close the Backlight adjustment window. GPSMAP 2206/2210 Owner's Manual