Garmin GPSMAP 2206 Owner's Manual - Page 66
Sonar Alarms, System Tab, General Sub Tab
UPC - 753759053024
View all Garmin GPSMAP 2206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Main Menu > System Tab Sonar Alarms Use the Sonar sub tab to set sonar* alarms, including shallow or deep water, water temperature, and fish. System Tab The System tab consists of five sub tabs:General, Units, Time, Comm, and Update. • Shallow Water/Deep Water-sets an alarm to sound when you enter an area of specified depth that is too shallow or too deep. You must be receiving sonar data for this function to work. • Water Temperature-sets an alarm to sound when the transducer reports a temperature either above, below, inside, or outside the specified values. • Fish -sets an alarm to sound when the unit detects a fish of the specified symbols. *You must be receiving NMEA sonar data or using a GSD 20, GSD 21, or GSD 22 for the sonar alarms to function. 58 General Sub Tab Use the General sub tab to control system settings for system mode, speed filter, automatic backlight, beeper, language, simulator controls, restore factory default settings, and to view the software version. The following settings and options are available: • System Mode-select Normal (normal navigation) or Simulator (for practice only). For more information about Simulator Mode, see "Simulator Mode" on page 8. • Speed Filter-averages speed readings. Select Off, Auto (automatically controls filtering), or On (allows you to enter a value from 1 to 255 seconds). • Automatic Backlight-automatically adjusts the display brightness to a specified level at sunrise and sunset. You can specify offset minutes for before sunrise and after sunset. GPSMAP 2206/2210 Owner's Manual