HP 1050c Service Manual - Page 271
Platen Assembly
View all HP 1050c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
Removal and Installation Platen Assembly Removal WARNING NOTE Switch off the printer and remove the power cord. 1. Open the window. In the following steps, please treat the screws with great care as they can easily be damaged. 2. Remove twenty-nine screws T-10 screws (item 1) from the platen assembly (item 2) and remove the platen assembly (see Figure 68). 2 1 C607421 CAUTION NOTE Figure 68: Platen Assembly Installation of the Platen Assembly When installing the Platen Assembly, make sure the screws are installed properly so that the heads of the screws do not interfere with the media path when the printer is in use. Do not exceed a torque of 10 psi on the screws. You must perform the following Service Calibrations after the installation of the Platen Assembly. n Carriage Height Calibration ⇒ Page 5-24. n Service Station ⇒ Page 5-11. n Color to Color Calibration ⇒ Page 5-16. HP DesignJets 1050C and 1055CM Printers Service Manual 8-63