HP 14-bs000 Maintenance and Service Guide - Page 62
TouchPad button board, To remove the TouchPad button board
View all HP 14-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
TouchPad button board Description TouchPad button board TouchPad button board cable TouchPad cable Spare part number 925365-001 925344-001 925346-001 Before removing the TouchPad button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34), if installed. 6. Remove the bottom cover (see Bottom cover on page 41). To remove the TouchPad button board: 1. Disconnect the cable from the TouchPad button board (1). 2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the TouchPad button board to the computer. 3. Lift the bottom of the board upward, and then remove it from the computer (3). Reverse this procedure to install the TouchPad button board. 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts