HP 14-bs000 Maintenance and Service Guide - Page 69

USB board, Remove the Phillips PM2.5×5.0 screw

Get HP 14-bs000 PDF manuals and user guides View all HP 14-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

USB board Description USB board for use in models with Intel Pentium or Celeron processors USB board for use in models with Intel Core processors USB board cable Spare part number 925363-001 925364-001 925343-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34), if installed. 6. Remove the bottom cover (see Bottom cover on page 41). 7. Remove the speakers (see Speakers on page 59). To remove the USB board: 1. Disconnect the cable from the connector on the USB board (1). 2. Remove the Phillips PM2.5×5.0 screw (2) that secures the board to the computer. 3. Remove the USB board from the computer (3). Reverse this procedure to install the USB board. Component replacement procedures 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
USB board
Description
Spare part number
USB board for use in models with Intel Pentium or Celeron processors
925363-001
USB board for use in models with Intel Core processors
925364-001
USB board cable
925343-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
32
).
5.
Remove the optical drive (see
Optical drive
on page
34
), if installed.
6.
Remove the bottom cover (see
Bottom cover
on page
41
).
7.
Remove the speakers (see
Speakers
on page
59
).
To remove the USB board:
1.
Disconnect the cable from the connector on the USB board
(1)
.
2.
Remove the Phillips PM2.5×5.0 screw
(2)
that secures the board to the computer.
3.
Remove the USB board from the computer
(3)
.
Reverse this procedure to install the USB board.
Component replacement procedures
61