HP 14-bs000 Maintenance and Service Guide - Page 79
Remove the three broadhead Phillips PM2.5×3.0 screws, and the PM2.0×3.0 screw
View all HP 14-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
b. Remove the caps from the hinges (2). c. Remove the two Phillips PM2.0×3.0 screws (1), and then lift the top display hinge (2) off the display. d. Remove the three broadhead Phillips PM2.5×3.0 screws (1) and the PM2.0×3.0 screw (2) that secure each hinge to the display enclosure. Component replacement procedures 71
b.
Remove the caps from the hinges
(2)
.
c.
Remove the two Phillips PM2.0×3.0 screws
(1)
, and then lift the top display hinge
(2)
off
the
display.
d.
Remove the three broadhead Phillips PM2.5×3.0 screws
(1)
and the PM2.0×3.0 screw
(2)
that
secure each hinge to the display enclosure.
Component replacement procedures
71