HP 14-bs000 Maintenance and Service Guide - Page 73

RTC battery, Remove the system board see

Get HP 14-bs000 PDF manuals and user guides View all HP 14-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

RTC battery Description RTC battery Spare part number 746439-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34), if installed. 6. Remove the bottom cover (see Bottom cover on page 41). 7. Remove the system board (see System board on page 62). To remove the RTC battery: 1. Position the system board upside down. 2. Using a thin tool, disengage the battery from the socket (1), and then remove the battery (2). Reverse this procedure to install the RTC battery. Component replacement procedures 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
RTC battery
Description
Spare part number
RTC battery
746439-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
32
).
5.
Remove the optical drive (see
Optical drive
on page
34
), if installed.
6.
Remove the bottom cover (see
Bottom cover
on page
41
).
7.
Remove the system board (see
System board
on page
62
).
To remove the RTC battery:
1.
Position the system board upside down.
2.
Using a thin tool, disengage the battery from the socket
(1)
, and then remove the battery
(2)
.
Reverse this procedure to install the RTC battery.
Component replacement procedures
65