HP 14-bs000 Maintenance and Service Guide - Page 83
Power connector cable, Remove the display see
View all HP 14-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Power connector cable Description Power connector cable Spare part number 938292-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34), if installed. 6. Remove the bottom cover (see Bottom cover on page 41). 7. Remove the display (see Display assembly on page 66). To remove the power connector cable: 1. Disconnect the power connector cable from the system board (1). 2. Use a tool to disengage the connector from the computer (2), and then remove the power connector cable (3). Reverse this procedure to install the power connector cable. Component replacement procedures 75