HP 14.4kVA HP Monitored Power Distribution Unit User Guide - Page 52
IPv4 Submenu, Factory Submenu, Example IPv4 Submenu Displays
View all HP 14.4kVA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
LCD Interface Operation IPv4 Submenu The IPv4 submenu allows you to set options for: l DHCP l IP address l Subnet Mask l Gateway Figure 44 shows the IP Address displays. On the Settings menu, scroll up or down to highlight IPv4. Press ENTER to display the options screen. Scroll up or down to highlight the selected option from the menu. Press ENTER to display the screens to set the values for the selected option. After you select the values, press ENTER to set the values as displayed on the screen. Press ESC to return to the previous menu. Settings IPv4 Settings ADiCspTlIaVyE ALARMS EDVaiEsyNCThLaOinG OIIPPUvv44TLET READINGS Enter SFaEcTtoTrIyNGS ePDU INFO ESC DHCP IP address Subnet Mask Gateway ESC Figure 44. Example IPv4 Submenu Displays IP address 192 168 Enter 1 2 ESC OK IP address 192 168 Enter 1 2 ESC OK Enter Factory Submenu The Factory submenu allows you to reset the PDU to the factory settings (see Figure 45). On the Settings menu, scroll down to highlight Factory. Press ENTER to display the screens to set and confirm the return to factory settings. After you make the selections, press ENTER to set the values as displayed on the screen. Press ESC to return to the previous menu. Settings Factory Display Daisy Chain IPv4 Factory Return to Enter Factory Enter Settings? Yes No ESC Figure 45. Example Factory Submenu Displays Factory Confirm... OK Cancel Enter HP Monitored PDU User's Guide P-164000281-Rev 1 46