HP 240 HP 450 Notebook PC and HP 455 Notebook PC Maintenance and Service Guide - Page 66
Optical drive, Remove the Phillips PM2.5×4.0 screw
View all HP 240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Optical drive NOTE: The optical drive spare part kit includes the rear optical drive bracket but does not include the optical drive cable or cable bracket. The optical drive cable and cable bracket are included in the optical drive cable kit. See Optical drive cable on page 90 for more information about the optical drive cable and cable bracket. Description DVD±RW and CD-RW Super Multi Double-Layer Combo Drive Optical drive insert for use in models without an optical drive Spare part number 685096-001 702756-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the memory module/wireless module compartment cover (see WLAN module on page 49). 6. Remove the hard drive (see Hard drive on page 54). To remove the optical drive: 1. Remove the Phillips PM2.5×4.0 screw (1) that secures the optical drive to the computer. 2. Insert a screwdriver or similar small tool into the hole at the rear of the optical drive bay, and then push the optical drive (2) to release it from the bay. 58 Chapter 4 Removal and replacement procedures