HP 4000 Maintenance & Service Guide HP Compaq 4000 Pro Small Form Factor B - Page 131
Solving Diskette Problems, Solving Hardware Installation Problems,
![]() |
View all HP 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Solving Diskette Problems Common causes and solutions for diskette problems are listed in the following table. NOTE: The computer does not support internal diskette drives. Only USB diskette drives are supported. NOTE: You may need to reconfigure the computer when you add or remove hardware, such as an additional diskette drive. See Solving Hardware Installation Problems on page 140 for instructions. Diskette drive light stays on. Cause Diskette is damaged. Diskette is incorrectly inserted. Drive cable is not properly connected. Solution In Microsoft Windows XP, right-click Start, click Explore, and select a drive. Select File > Properties > Tools. Under Error-checking click Check Now. In Microsoft Windows Vista and Windows 7, right-click Start, click Explore, and right-click on a drive. Select Properties then select the Tools tab. Under Error-checking click Check Now. Remove diskette and reinsert. Reconnect drive cable. Ensure that all four pins on the diskette power cable are connected to the drive. Drive not found. Cause Cable is loose. Removable drive is not seated properly. Solution Reseat diskette drive data and power cable. Reseat the drive. Diskette drive cannot write to a diskette. Cause Diskette is not formatted. Diskette is write-protected. Writing to the wrong drive. Solution Format the diskette. 1. From Windows Explorer select the disk (A) drive. 2. Right-click the drive letter and select Format. 3. Select the desired options, and click Start to begin formatting the diskette. Use another diskette or remove the write protection. Check the drive letter in the path statement. Solving Diskette Problems 121
![](/manual_guide/products/hewlettpackard-4000-maintenance-service-guide-hp-compaq-4000-pro-small-form-factor-business-pc-a540ffd/131.png)