HP 4000 Maintenance & Service Guide HP Compaq 4000 Pro Small Form Factor B - Page 69
Removing an Internal 5.25-inch Drive, CAUTION,
View all HP 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Removing an Internal 5.25-inch Drive CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. To remove a 5.25-inch internal drive: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 40). 2. Remove the access panel (Computer Access Panel on page 41). 3. Rotate the drive cage to its upright position (1) and remove the mounting screw on the back left side of the drive (2). Figure 6-18 Removing the Drive Mounting Screw 4. Press and hold down the latch to disconnect the power cable (1) and data cable (2) from the rear of the optical drive. Figure 6-19 Disconnecting the Power and Data Cables Drives 59
Removing an Internal 5.25-inch Drive
CAUTION:
All removable media should be taken out of a drive before removing the drive from the
computer.
To remove a 5.25-inch internal drive:
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
40
).
2.
Remove the access panel (
Computer Access Panel
on page
41
).
3.
Rotate the drive cage to its upright position
(1)
and remove the mounting screw on the back left
side of the drive
(2)
.
Figure 6-18
Removing the Drive Mounting Screw
4.
Press and hold down the latch to disconnect the power cable
(1)
and data cable
(2)
from the rear
of the optical drive.
Figure 6-19
Disconnecting the Power and Data Cables
Drives
59