HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 227
Configuring and Displaying Source-Port QoS Priorities
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Quality of Service (QoS): Managing Bandwidth More Effectively Using QoS Classifiers To Configure Quality of Service for Outbound Traffic Syntax: no interface < port-list > qos Disables use of the specified source-port(s) for QoS classifier(s) and resets the priority for the specified source-port(s) to No-override. Syntax: show qos port-priority Lists the QoS port-priority classifiers with their priority data. For example, suppose that you want to prioritize inbound traffic on the following source-ports: Source-Port Priority 1 - 3 6 4 - 5 5 6 -7 3 You would then execute the following commands to prioritize traffic received on the above ports. ProCurve(config)# interface 1-3 qos priority 6 ProCurve(config)# interface 4-5 qos priority 5 ProCurve(config)# interface 6-7 qos priority 3 ProCurve(config)# show qos port-priority Port priorities Port Apply rule | DSCP Priority Radius Override 1 Priority | 6 No-override 2 Priority | 6 No-override 3 Priority | 6 No-override 4 Priority | 5 No-override 5 Priority | 5 No-override 6 Priority | 3 No-override 7 Priority | 3 No-override 8 No-override | No-override No-override 9 No-override | No-override No-override 10 No-override | No-override No-override Figure 5-20. Configuring and Displaying Source-Port QoS Priorities If you then decided to remove port A1 from QoS prioritization: 5-47