HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 57
Example of Show VLAN Listing GVRP Enabled, Status, Port-Based, Protocol, Dynamic
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Static Virtual LANs (VLANs) Configuring VLANs Name: The default or specified name assigned to the VLAN. For a static VLAN, the default name consists of VLAN-x where "x" matches the VID assigned to that VLAN. For a dynamic VLAN, the name consists of GVRP_x where "x" matches the applicable VID. Status: Port-Based: Port-Based, static VLAN Protocol: Protocol-Based, static VLAN Dynamic: Port-Based, temporary VLAN learned through GVRP (Refer to chapter 3, "GVRP" .) Voice: Indicates whether a (port-based) VLAN is configured as a voice VLAN. Refer to "Voice VLANs" on page 2-56. Jumbo: Indicates whether a VLAN is configured for Jumbo packets. For more on jumbos, refer to the chapter titled "Port Traffic Controls" in the Management and Configuration Guide for your switch. For example: When GVRP is disabled (the default), Dynamic VLANs do not exist on the switch and do not appear in this listing. (Refer to chapter 3, "GVRP" .) Figure 2-18. Example of "Show VLAN" Listing (GVRP Enabled) Displaying the VLAN Membership of One or More Ports. 2-29