HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 97
Per-Port Options for Dynamic VLAN, Advertising and Joining, Initiating Advertisements.
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
GVRP Per-Port Options for Dynamic VLAN Advertising and Joining Per-Port Options for Dynamic VLAN Advertising and Joining Initiating Advertisements. As described in the preceding section, to enable dynamic joins, GVRP must be enabled and a port must be configured to Learn (the default). However, to send advertisements in your network, one or more static (Tagged, Untagged, or Auto) VLANs must be configured on one or more switches (with GVRP enabled), depending on your topology. Enabling a Port for Dynamic Joins. You can configure a port to dynamically join a static VLAN. The join will then occur if that port subsequently receives an advertisement for the static VLAN. (This is done by using the Auto and Learn options described in table 3-2, on the next page. Parameters for Controlling VLAN Propagation Behavior. You can configure an individual port to actively or passively participate in dynamic VLAN propagation or to ignore dynamic VLAN (GVRP) operation. These options are controlled by the GVRP "Unknown VLAN" and the static VLAN configuration parameters, as described in the following table: 3-9