HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 230
The Completed Source-Port DSCP-Priority Configuration, Radius Override Field.
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
Quality of Service (QoS): Managing Bandwidth More Effectively Using QoS Classifiers To Configure Quality of Service for Outbound Traffic For example, suppose you wanted to assign this set of priorities: Source-Port 2 1, 3 4, 5 DSCP 15 16 17 Priority 7 5 1 Assign the DSCP policies to the selected source-ports and display the result. ProCurve(config)# int 4,5 ProCurve(eth-4,5)# qos dscp 17 ProCurve(eth-4,5)# int 1,3 ProCurve(eth-1,3)# qos dscp 16 ProCurve(eth-1,3)# int 2 ProCurve(eth-2)# qos dscp 15 ProCurve(eth-2)# show qos port-priority Port priorities Port Apply rule | DSCP Priority Radius Override 1 No-override | 16 5 No-override 2 DSCP | 15 7 No-override 3 No-override | 16 5 No-override 4 No-override | 17 1 No-override 5 No-override | 17 1 No-override 6 No-override | No-override No-override 7 No-override | No-override No-override Figure 5-22. The Completed Source-Port DSCP-Priority Configuration Radius Override Field. During a client session authenticated by a RADIUS server, the server can impose a port priority that applies only to that client session. Refer to the RADIUS chapter in the Access Security Guide for your switch. 5-50