HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 66
Example of Creating a New, Port-Based, Static VLAN, Deleting a VLAN.
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Static Virtual LANs (VLANs) Configuring VLANs name < ascii-name-string > When included in a vlan command for creating a new static VLAN, specifies a non-default VLAN name. Also used to change the current name of an existing VLAN. (Avoid spaces and the following characters in the entry and ). To include a blank space in a VLAN name, enclose the name in single or double quotes ('...' or "..."). [ voice] Designates a VLAN for VoIP use. For more on this topic, refer to "Voice VLANs" on page 2-56. For example, to create a new, port-based, static VLAN with a VID of 100: Creates the new VLAN. Shows the VLANs currently configured in the switch. If this field is empty, a Secure Management VLAN is not configured in the switch. Refer to "The Secure Management VLAN" on page 2-48 Figure 2-25. Example of Creating a New, Port-Based, Static VLAN To go to a different VLAN context level, such as to the default VLAN: ProCurve(vlan-100)# vlan default_vlan ProCurve(vlan-1) _ Deleting a VLAN. If ports B1-B5 belong to both VLAN 2 and VLAN 3, and ports B6-B10 belong to VLAN 3 only, then deleting VLAN 3 causes the CLI to prompt you to approve moving ports B6 - B10 to VLAN 1 (the default VLAN). (Ports B1-B5 are not moved because they still belong to another VLAN.) ProCurve(config)# no vlan 3 The following ports will be moved to the default VLAN: B6-B10 Do you want to continue? [y/n] y ProCurve(config)# 2-38