HP 8100n HP LaserJet 8100, 8100 N, 8100 DN Printers - Getting Started Guide, C - Page 17
Step 7, Load Trays 2 and 3
UPC - 088698296417
View all HP 8100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Step 7 Load Trays 2 and 3 1 Note The paper size setting is set to a default size at the factory. The default for the United States is letter-size, while in Europe it is A4. If you would like to use a different default paper size, reconfigure the paper tray setting. 2 1 Open Tray 2 until it stops. 2 Remove the packing spacer and tape. 3 If you wish to load paper that is different than the default size, turn the paper guide to the mark that indicates the size of paper you are 3 loading. 4 Turn the paper guide to the locked position. 5 Adjust the left paper guide by pushing in, then lifting up and out. Continued on the next page. 4 5 EN Load Trays 2 and 3 11
EN
Load Trays 2 and 3
11
Step 7
Load Trays 2 and 3
Note
The paper size setting is set to a default
size at the factory. The default for the
United States is letter-size, while in
Europe it is A4. If you would like to use a
different default paper size, reconfigure
the paper tray setting.
1
Open Tray 2 until it stops.
2
Remove the packing spacer and
tape.
3
If you wish to load paper that is
different than the default size, turn
the paper guide to the mark that
indicates the size of paper you are
loading.
4
Turn the paper guide to the locked
position.
5
Adjust the left paper guide by
pushing in, then lifting up and out.
Continued on the next page.
1
2
3
4
5