HP BladeSystem bc2800 Service Reference Guide: HP BladeSystem PC bc2000/bc2500 - Page 19
POST (Power On Self Test) Error Messages
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
POST (Power On Self Test) Error Messages The Integrated Administrator (IA) has details containing new information it receives from the Blade Management Controller (BMC). You can use the IA syslog to determine when a fault occurred. Message 101-Option ROM Checksum Error 102/103-System Board error 162-System Options Not Set 163-Time & Date Not Set 164-Memory Size Error 201-Memory Error 301-Keyboard Error 303-Keyboard Controller Error 304-Keyboard or System Unit Error 1780-Disk 0 Failure 1792-No IDE fixed disk present Health LED Red Red Amber Amber Amber Red Amber Amber Amber Amber Corrective Action ● Clear CMOS. ● Flash ROM if necessary. ● Replace blade PC. ● Clear CMOS. ● Replace blade PC. ● Set time and date in Computer Setup. ● Replace RTC battery. ● Set time and date in Computer Setup. ● Replace RTC battery. ● Ensure DIMMs properly installed. ● Verify proper DIMM type. ● Remove and replace modules one at a time to isolate faulty module. ● Replace blade PC. ● Ensure DIMMs properly installed. ● Verify proper DIMM type. ● Remove and replace modules one at a time to isolate faulty module. ● Replace blade PC. ● Reconnect keyboard with blade PC turned off. ● Try different keyboard. ● Replace blade PC. ● Reconnect keyboard with blade PC turned off. ● Replace keyboard. ● Replace blade PC. ● Run Computer Setup DPS Self Test from Computer Setup. ● Replace hard drive. ● Check if hard drive is present. If so, run Computer Setup DPS Self Test from Computer Setup. ● Replace hard drive. POST (Power On Self Test) Error Messages 15