HP BladeSystem bc2800 Service Reference Guide: HP BladeSystem PC bc2000/bc2500 - Page 8
Removing a Blade PC, CAUTION
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Item 1 LED Unit Identification 2 Health 3 NIC A 4 NIC B 5 Drive activity 6 Power Status Off Blue Blue blinking Off Green Amber Red Red blinking Off Green Green blinking Off Green Green blinking Off Green blinking Off Amber Green Description Off Identification of blade PC Being remotely accessed Blade PC off Blade PC on and good health Blade PC degraded or power-up prohibited by the Integrated Administrator. Blade PC critical Blade PC critical No connection Linked to network Linked and activity on the network No connection Linked to network Linked and activity on the network No drive activity Drive activity No AC power to enclosure or blade PC Enclosure on and health good Blade PC power turned on 2. If the blade PC is active, notify the users and stop applications as necessary. 3. Shut down the operating system. This may shut off blade PC power. 4. If the blade PC still has power, power down the blade PC by either: ● Using the Integrated Administrator, or ● Pressing the power button (6) on the front of the blade PC. To perform an emergency shut down of the blade PC, press and hold the blade PC power button for four seconds. CAUTION: Performing an emergency shutdown on a blade PC may result in the loss of any unsaved data. Removing a Blade PC To remove a blade PC: 1. Power down the blade PC (Powering Down the BladeSystem PC on page 3). 2. Press the release latch (1). 4 Chapter 2 Removal and Replacement