HP Brocade 8/12c HP StorageWorks B-series Data Center Fabric Manager Professio - Page 10

NOTE: Be sure to install the DCFM application on a dedicated machine that is not running any other server applications, such as another database server. Documentation updates There are no documentation updates with this release. DCFM 10.1.0 fixes Table 3 lists defects closed in the DCFM 10.1.0 release. Table 3 DCFM 10.1.0 closed defects Closed defect summary Solution Help dialog is not launched for Technical Support Data Fixed in DCFM 10.1.0 Collection dialog. Workaround-Navigate to the correct help section by launching the main help dialog. Location, Description, and Contact column details are not populated in the Product List. Symptom-The user does not see any values for Location, Contact, and Description columns in Product list. Fixed in DCFM 10.1.0 Workaround-The values can be obtained from CLI/WT. Configuring NTP clockserver parameters fails from DCFM. Symptom-User will not be able to configure clockserver parameter from DCFM. Also a success message is displayed for the failed operation. Fixed in DCFM 10.1.0 Workaround-Configure clockserver parameter from CLI using command configdownload. Call home are not getting generated when a DCFM server is configured with IPv6 address. Symptom-User will not receive Call Home if DCFM server configured with IPv6 address. Fixed in DCFM 10.1.0 Altering the N_Port to F_Port mappings of an Access Gateway is not updated on the host group of product list device tree. Symptom-User views incorrect N_Port mappings in the host group of the product list device tree, when the N_Port mapset of an Access Gateway is changed. Fixed in DCFM 10.1.0 Workaround-View correct N_Port mappings through the ag -mapshow CLI command executed on the AG. Unable to see all toolbar buttons at once in View nl Reports dialog when there are no reports. Symptom-Customer is unable to see all the toolbar buttons at once in the View Reports dialog when there are no reports. Fixed in DCFM 10.1.0 10