HP CF285A User Manual - Page 73

Con IP network settings, View or change network settings

Page 73 highlights

Configure IP network settings View or change network settings Use the HP Device Toolbox to view or change IP configuration settings. 1. Print a configuration page, and locate the IP address. ● If you are using IPv4, the IP address contains only digits. It has this format: xxx.xxx.xxx.xxx ● If you are using IPv6, the IP address is a hexadecimal combination of characters and digits. It has a format similar to this: xxxx::xxxx:xxxx:xxxx:xxxx 2. Open the HP Device Toolbox by clicking the Start button, clicking the Programs or All Programs group, clicking HP, clicking the product group, and then clicking HP Product Settings. 3. Click the Networking tab to obtain network information. You can change settings as needed. Manually configure IPv4 TCP/IP parameters from the control panel Manually configure IPv4 TCP/IP parameters (LCD control panel) 1. On the control panel, press the OK button. 2. Use the arrow buttons to select the Network Setup option, and then press the OK button. 3. Use the arrow buttons to select the TCP/IP configuration option, and then press the OK button. 4. Use the arrow buttons to select the Manual option, and then press the OK button. 5. Use the alphanumeric buttons to type the IP address, and then press the OK button. 6. If the IP address is incorrect, use the arrow buttons to select the No option, and then press the OK button. Repeat step 5 with the correct IP address, and then repeat step 5 for the subnet mask and default gateway settings. Manually configure IPv4 TCP/IP parameters (touchscreen control panel) Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway. 1. From the Home screen on the product control panel, touch the Setup button. 2. Scroll to and touch the Network Setup menu. 3. Touch the TCP/IP Config menu, and then touch the Manual button. 4. Use the numeric keypad to enter the IP address, and touch the OK button. Touch the Yes button to confirm. ENWW Configure IP network settings 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148

Configure IP network settings
View or change network settings
Use the
HP Device Toolbox
to view or change IP configuration settings.
1.
Print a configuration page, and locate the IP address.
If you are using IPv4, the IP address contains only digits. It has this format:
xxx.xxx.xxx.xxx
If you are using IPv6, the IP address is a hexadecimal combination of characters and digits. It
has a format similar to this:
xxxx::xxxx:xxxx:xxxx:xxxx
2.
Open the
HP Device Toolbox
by clicking the
Start
button, clicking the
Programs
or
All
Programs
group, clicking
HP
, clicking the product group, and then clicking
HP Product
Settings
.
3.
Click the
Networking
tab to obtain network information. You can change settings as needed.
Manually configure IPv4 TCP/IP parameters from the control panel
Manually configure IPv4 TCP/IP parameters (LCD control panel)
1.
On the control panel, press the
OK
button.
2.
Use the arrow buttons to select the
Network Setup
option, and then press the
OK
button.
3.
Use the arrow buttons to select the
TCP/IP configuration
option, and then press the
OK
button.
4.
Use the arrow buttons to select the
Manual
option, and then press the
OK
button.
5.
Use the alphanumeric buttons to type the IP address, and then press the
OK
button.
6.
If the IP address is incorrect, use the arrow buttons to select the
No
option, and then press the
OK
button. Repeat step 5 with the correct IP address, and then repeat step 5 for the subnet mask and
default gateway settings.
Manually configure IPv4 TCP/IP parameters (touchscreen control panel)
Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.
1.
From the Home screen on the product control panel, touch the Setup
button.
2.
Scroll to and touch the
Network Setup
menu.
3.
Touch the
TCP/IP Config
menu, and then touch the
Manual
button.
4.
Use the numeric keypad to enter the IP address, and touch the
OK
button. Touch the
Yes
button to
confirm.
ENWW
Configure IP network settings
61