HP D4360 Full User Guide - Page 108

Part of the photo is faded, Fading occurs on the edges of a photo, Image is printed at an angle

Page 108 highlights

Troubleshooting Image is printed at an angle Solution: Verify that no problem exists with the source image. For example, if you are printing a scanned image, verify that the image was not crooked when it was scanned. If the problem is not caused by the source image, follow these steps: 1. Remove all paper from the input tray. 2. Load the paper correctly in the input tray. 3. Verify that the paper guide fits firmly against the edge of the paper. 4. Follow loading instructions for the paper type. Part of the photo is faded Fading might occur on the edges or near the edges of a photo. • Fading occurs on the edges of a photo • Fading occurs near the edges of a photo Fading occurs on the edges of a photo Problems with borderless documents 105

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137

Image is printed at an angle
Solution:
Verify that no problem exists with the source image. For example, if you are printing
a scanned image, verify that the image was not crooked when it was scanned.
If the problem is not caused by the source image, follow these steps:
1.
Remove all paper from the input tray.
2.
Load the paper correctly in the input tray.
3.
Verify that the paper guide fits firmly against the edge of the paper.
4.
Follow loading instructions for the paper type.
Part of the photo is faded
Fading might occur on the edges or near the edges of a photo.
Fading occurs on the edges of a photo
Fading occurs near the edges of a photo
Fading occurs on the edges of a photo
Problems with borderless documents
105
Troubleshooting