HP Designjet 815mfp HP Designjet 4200 Scanner - User Guide - Page 65
tell me about the scanner insertion slot
View all HP Designjet 815mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
see also maintenance procedures on page 24 tell me about the scanner insertion slot You can change the insertion slot height from 2 to 16 mm (0.08 to 0.63 inches). The Normal position (Step 0: 2 mm/0.08 in) is detected by a sensor in the scanner. The insertion slot is marked with a measurement ruler for inches and millimeters. The ruler corresponds to right side aligned original loading. Just below the ruler are marked common standard sizes that help guide you with optional centered loading. The loading method, right-side or centered, can be selected from your scanner software. The scan area width measured in standard units (inches or millimeters) is also set from the software. The required setting for an original drawing can be measured with the original inserted into the scanner by using the ruler printed on top of the insertion slot. Then, you just enter your measurement in the width setting box in the current scanner application's media size setup dialogs. To change the insertion slot height, see how do I change the insertion slot height? on page 8. hp designjet 815mfp & scanner 4200 59