HP Designjet T770 HP Designjet T770 & T1200 Printer series - Users Guide - Page 194
Front-panel errors, Front-panel error messages - error codes
View all HP Designjet T770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Table 19-1 Text messages (continued) Message PDL Error: Job clipped PDL Error: memory full PDL Error: out of paper PDL Error: parsing error PDL Error: print mode error PDL Error: printing error PDL Error: virtual memory full Printhead alignment error: paper too small Replace [color] cartridge Reseat [color] cartridge Update: failed. Invalid file Recommendation The image is too large for the paper or for the printer. Load larger paper if possible, or reduce the image size. Restart the printer and try resending the job; if necessary, reduce the complexity of the job. Load more paper. The print job is unintelligible to the printer. Try to recreate and resend it. Check your cable connections. The paper type or print quality specified for the job are incorrect. Change the loaded paper type or the print settings. Try sending the job again. Restart the printer and try resending the job; if necessary, reduce the complexity of the job. Unload paper and load larger paper. Replace the cartridge. See Handling ink cartridges and printheads on page 117. Remove and reinsert the same cartridge. See Handling ink cartridges and printheads on page 117. Make sure that you have selected the correct firmware update file. Then try again to perform the update. Table 19-2 Numerical error codes Error code Recommendation 01.0, 01.1, 01.2 Restart the printer. If the problem persists, contact HP Support. See Contact HP Support on page 190. 21, 21.1, 22.0, 22.1, 22.2, 22.3, 24 Restart the printer. If the problem persists, contact HP Support. See Contact HP Support on page 190. 61:01 The file format is wrong and the printer cannot process the job. Check the graphic language setting of your printer (see Change the graphic language setting on page 32). If you are sending PostScript from Mac OS over a USB connection, select ASCII encoding in both the driver and the application. Check for the latest firmware and driver releases. 62, 63, 64, 65, 67 Update your printer's firmware. See Update the firmware on page 131. 71.04 Out of memory. To avoid this, in the HP-GL/2 and HP RTL driver select the Advanced tab and then Send job as a bitmap. 74.1 Try the firmware update again. Do not try to use your computer while the update is in progress. If the problem persists, contact HP Support. See Contact HP Support on page 190. 79:03 Restart the printer. If the problem persists, contact HP Support. See Contact HP Support on page 190. 79:04 Update your printer's firmware. See Update the firmware on page 131. 81:01, 86:01 Please follow the instructions on the front panel. You may be asked to run a test procedure and write down a numeric code before contacting HP Support. See Contact HP Support on page 190. 94, 94.1 Restart color calibration. See Color calibration on page 70. Front-panel errors 186 Chapter 19 Front-panel error messages ENWW