HP ENVY 15-3033cl HP ENVY 15 - Maintenance and Service Guide - Page 71

that secure the audio/USB board to the, disconnect the audio/USB board ribbon cable

Get HP ENVY 15-3033cl PDF manuals and user guides View all HP ENVY 15-3033cl manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

4. Turn the computer right side up, with the front toward you. 5. Open the computer as far as it will open. 6. Disconnect the front speaker cable (1) and the subwoofer cable (2) from the audio/USB board. 7. Disconnect the audio/USB board cable (3) from the system board. 8. Release the ZIF connector to which the audio/USB board ribbon cable is connected, and then disconnect the audio/USB board ribbon cable (4) from the system board. 9. Remove the three Phillips PM2.0×2.8 screws (1) that secure the audio/USB board to the base enclosure. 10. Lift the left side of the audio/USB board (2) until the audio connectors are clear of the base enclosure. ENWW Component replacement procedures 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
4.
Turn the computer right side up, with the front toward you.
5.
Open the computer as far as it will open.
6.
Disconnect the front speaker cable
(1)
and the subwoofer cable
(2)
from the audio/USB board.
7.
Disconnect the audio/USB board cable
(3)
from the system board.
8.
Release the ZIF connector to which the audio/USB board ribbon cable is connected, and then
disconnect the audio/USB board ribbon cable
(4)
from the system board.
9.
Remove the three Phillips PM2.0×2.8 screws
(1)
that secure the audio/USB board to the
base enclosure.
10.
Lift the left side of the audio/USB board
(2)
until the audio connectors are clear of the
base enclosure.
ENWW
Component replacement procedures
63