HP ENVY 15-3033cl HP ENVY 15 - Maintenance and Service Guide - Page 92
Subwoofer, Top speakers see
View all HP ENVY 15-3033cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Subwoofer Description Subwoofer (includes cables and 2 grommets) Spare part number 668844-001 Before removing the subwoofer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35), and then remove the following components: a. Service cover (see WLAN module on page 42) b. Top cover (see Top cover on page 47) c. Display assembly (see Display assembly on page 56) d. System board (see System board on page 72) e. Top speakers (see Top speakers on page 69) Remove the subwoofer: 1. Remove the six Phillips PM2.0×2.8 screws (1) and the two Phillips PM2.5×6.4 screws (2) that secure the subwoofer to the base enclosure. NOTE: When removing the subwoofer, make note of the location of the two rubber isolators (2) that are installed in the screw holes as indicated in the following illustration. 84 Chapter 4 Removal and replacement procedures ENWW