HP ENVY 15-3033cl HP ENVY 15 - Maintenance and Service Guide - Page 90
Power connector cable, Remove the power connector cable
View all HP ENVY 15-3033cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Power connector cable Description Power connector cable (includes bracket) Spare part number 668826-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35), and then remove the following components: a. Service cover (see WLAN module on page 42) b. Top cover (see Top cover on page 47) c. Display assembly (see Display assembly on page 56) d. Top speakers (see Top speakers on page 69) e. System board (see System board on page 72) Remove the power connector cable: 1. Turn the base enclosure upside down, with the rear panel toward you. 2. Release the power connector cable (1) from the clips (2) and routing channel built into the base enclosure. 82 Chapter 4 Removal and replacement procedures ENWW