HP ENVY 15-3033cl HP ENVY 15 - Maintenance and Service Guide - Page 74
Wireless audio module connector board
View all HP ENVY 15-3033cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Wireless audio module connector board Description Wireless audio module connector board (includes cable) Spare part number 668837-001 Before removing the wireless audio module connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. Remove the service cover (see WLAN module on page 42). 6. Remove the top cover (see Top cover on page 47). Remove the wireless audio module connector board: 1. Release the ZIF connector to which the wireless audio module connector board cable is connected, and then disconnect the wireless audio module connector board cable (1) from the system board. 2. Remove the two Phillips PM2.0×2.8 screws (2) that secure the wireless audio module connector board to the base enclosure. 3. Remove the wireless audio module connector board (3). Reverse this procedure to install the wireless audio module connector board and cable. 66 Chapter 4 Removal and replacement procedures ENWW