HP ENVY 17-3000 HP ENVY17 3D Getting Started - Windows 7 (3D Models Only) - Page 72
Align the notched edge, memory module.
View all HP ENVY 17-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
b. Grasp the edge of the memory module (2), and then gently pull the module out of the memory module slot. CAUTION: To reduce the risk of damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protect a memory module after removal, place it in an electrostatic-safe container. 8. Insert a new memory module. CAUTION: To reduce the risk of damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. Position the memory module at a 45-degree angle from the surface of the memory module compartment, and then press the module (2) into the slot until the module is seated. Adding or replacing memory modules 61