HP Elite Dragonfly 13.5 Maintenance and Service Guide - Page 51
Solid-state drive, Remove the solid-state drive
View all HP Elite Dragonfly 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2. Remove the USB board (2). Reverse this procedure to install the USB module. Solid-state drive To remove the M.2 solid-state drive, use this procedure and illustration. Table 5-4 Solid-state drive descriptions and part numbers Description 2 TB, PCIe-4 × 4, ZTurbo, M.2 2280, TLC 1 TB, PCIe-4 × 4, NVMe, M.2 2280, TLC 512 GB, PCIe NVMe value, M.22280 512 GB, PCIe-4 × 4, M.2 2280, NVMe, TLC 512 GB, PCIe-4 × 4, M.2 2280, NVMe, TLC, SED 256 GB, PCIe-4 × 4, ZTurbo, TLC, M.2 2280 256 GB, PCIe-4 × 4, TLC, SED, M.2 2280 256 GB, PCIe, TLC, SED, M.2 2230, NVMe value Spare part number M52027-002 M16560-002 L85364-002 M17436-002 M52031-002 M52025-002 M52029-002 M11042-002 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 38). 2. Remove the bottom cover (see Bottom cover on page 38). 3. Remove the battery (see Battery on page 39). Remove the solid-state drive: 42 Chapter 5 Removal and replacement procedures for authorized service provider parts