HP Elite Dragonfly 13.5 Maintenance and Service Guide - Page 63
Display assembly, Remove the display assembly
View all HP Elite Dragonfly 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Before removing the tweeter modules, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 38). 2. Remove the bottom cover (see Bottom cover on page 38). 3. Remove the battery (see Battery on page 39). Remove the tweeter modules: 1. Disconnect the tweeter cables that secure the tweeters to the system board (1). 2. Remove the tweeter modules (2). Reverse this procedure to install the tweeter modules. Display assembly To remove and disassemble the display assembly, use these procedures and illustrations. Full hinge-up displays are not available as spare parts. Spare parts for displays are available only at the subcomponent level. Before removing the display panel, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 38). 2. Remove the bottom cover (see Bottom cover on page 38). 3. Remove the battery (see Battery on page 39). Remove the display assembly: 1. Disconnect the webcam cable from the system board (1), and disconnect the antenna cables from the WLAN module (2). 54 Chapter 5 Removal and replacement procedures for authorized service provider parts