HP Indigo 10000 SmartStream Production Pro Print Server - Inline Horizon Smart - Page 31
B. Installation instructions, Installation on the press, Press Configuration Tool, Devices
![]() |
View all HP Indigo 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
B Installation instructions It explains installation instructions. Installation on the press To configure the inline SmartStacker's connectivity to the press, do the following at the press: 1. Shut down the press software. 2. Click the Press Configuration icon on the desktop. 3. In the next window that appears, select the Customer engineer user level, enter the password, and click OK. The Press Configuration Tool window appears. 4. In the Devices tab, do the following: a. In the Select the stacker configuration pane, select One stacker and inline finisher. b. In the Inline finisher configuration pane, select the Connected via finishing line controller (L2) radio button. c. In the IP address / Host name field, type the FLC IP address or host name. 5. Click Save. NOTE: It might take several minutes for the configuration changes to be saved. Installation on the FLC To configure the inline SmartStacker's connectivity to the press, do the following on the Horizon FLC: 1. Click the settings icon at the bottom right of the window. Installation instructions 27
![](/manual_guide/products/hewlettpackard-indigo-10000-smartstream-production-pro-print-server-inline-horizon-smartstacker-howto-guidehowto-guide-29a564f/31.png)