HP Indigo WS6600 Dripping Prevention and ITM Heating Hood Service -- CA393-101 - Page 54

Elements Activation, Liquids,

Get HP Indigo WS6600 PDF manuals and user guides View all HP Indigo WS6600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

f. From the Elements Activation screen, Liquids tab, turn on the imaging oil pump, then turn on the cleaning station (CS) pump. Figure 3-27 Elements Activation screen - Liquids tab g. Verify that imaging oil is coming out of the hose, and let if flow for 60 seconds. h. Move the imaging oil hose to a graduated cylinder, and let it flow for 15 seconds. i. Move the imaging oil hose back to the reservoir and stop the cleaning station pump, imaging oil pump, and the cleaning station motor. j. Measure the imaging oil accumulated in the graduated cylinder. Multiply the value by 4. The correct value should be 4200 ml +/- 100 ml. For example: after 15 seconds, 1000 ml imaging oil are measured. When multiplied by 4, the value is 4000 ml. k. Pour the measured imaging oil back into the reservoir. Press in Shutdown 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
f.
From the
Elements Activation
screen,
Liquids
tab, turn on the imaging oil pump, then turn on
the cleaning station (CS) pump.
Figure 3-27
Elements Activation screen — Liquids tab
g.
Verify that imaging oil is coming out of the hose, and let if flow for 60 seconds.
h.
Move the imaging oil hose to a graduated cylinder, and let it flow for 15 seconds.
i.
Move the imaging oil hose back to the reservoir and stop the cleaning station pump, imaging
oil pump, and the cleaning station motor.
j.
Measure the imaging oil accumulated in the graduated cylinder. Multiply the value by 4. The
correct value should be 4200 ml +/- 100 ml.
For example: after 15 seconds, 1000 ml imaging oil are measured. When multiplied by 4, the
value is 4000 ml.
k.
Pour the measured imaging oil back into the reservoir.
Press in Shutdown
51