HP LH4r Compaq 4000/7000 Racks Installation Guide - Page 20
Removing the Fans, Remove all fans before you remove the fan cage. Otherwise
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 2 Preparing the HP NetServer 4. Pull the fan cover forward, and then lift the front of it about 1 inch (3 cm). 5. Push the fan cover backwards, and lift it off. 6. Remove all six fans by pulling them straight up, as shown in Figure 2-7. CAUTION Remove all fans before you remove the fan cage. Otherwise, the fans will fall out, which may damage the fans and other equipment. Figure 2-7. Removing the Fans 16
Chapter 2
Preparing the HP NetServer
16
4.
Pull the fan cover forward, and then lift the front of it about 1 inch (3 cm).
5.
Push the fan cover backwards, and lift it off.
6.
Remove all six fans by pulling them straight up, as shown in Figure 2-7.
CAUTION
Remove all fans before you remove the fan cage. Otherwise,
the fans will fall out, which may damage the fans and other
equipment.
Figure 2-7.
Removing the Fans