HP LH4r Compaq 4000/7000 Racks Installation Guide - Page 31
Screws, Top Cover, See
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 2 Preparing the HP NetServer 5. Lower the top cover onto the top of the HP NetServer, about one half-inch (1 cm) to the rear of its normal position when closed. See Figure 2-18. Screws Top Cover Figure 2-18. Reinstalling the Top Cover (HP NetServer LXr 8500 Shown) 6. Push the top cover forward until the slots in its front edge line up with the screw holes on the chassis. 7. Reinsert the screws, as shown in Figure 2-18. 27
Chapter 2
Preparing the HP NetServer
27
5.
Lower the top cover onto the top of the HP NetServer, about one half-inch
(1 cm) to the rear of its normal position when closed.
See Figure 2-18.
Screws
Top Cover
Figure 2-18.
Reinstalling the Top Cover
(HP NetServer LXr 8500 Shown)
6.
Push the top cover forward until the slots in its front edge line up with the
screw holes on the chassis.
7.
Reinsert the screws, as shown in Figure 2-18.