HP LH4r Compaq 4000/7000 Racks Installation Guide - Page 29
Reinstall the Fan Cage, Fans, Fan Cover, and Top Cover, HP NetServer LXr 8500 Shown
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 2 Preparing the HP NetServer Reinstall the Fan Cage, Fans, Fan Cover, and Top Cover CAUTION The light pipes on the underside of the fan cage are fragile. Be careful not to damage them. To reinstall the fan cage, fans, fan cover, and top cover do the following: 1. Orient the fan cage as shown in Figure 2-16, being careful not to damage the light pipes on the underside of the cage. Figure 2-16. Reinstall the Fan Cage (HP NetServer LXr 8500 Shown) 2. Lower the fan cage into the chassis. Ensure that the tabs on the front of the processor tray enter the slots on the fan cage. Tipping the top of the fan cage slightly forward (away from the HP NetServer) aids this insertion. 25
Chapter 2
Preparing the HP NetServer
25
Reinstall the Fan Cage, Fans, Fan Cover, and Top
Cover
CAUTION
The light pipes on the underside of the fan cage are fragile. Be
careful not to damage them.
To reinstall the fan cage, fans, fan cover, and top cover do the following:
1.
Orient the fan cage as shown in Figure 2-16, being careful not to damage
the light pipes on the underside of the cage.
Figure 2-16.
Reinstall the Fan Cage
(HP NetServer LXr 8500 Shown)
2.
Lower the fan cage into the chassis. Ensure that the tabs on the front of the
processor tray enter the slots on the fan cage. Tipping the top of the fan
cage slightly forward (away from the HP NetServer) aids this insertion.