HP LH4r HP Netserver Service Handbook, Volume 1 - Low End - Page 67

System Switches Switch position 1 - 5 6 Factory preset (See table below) Open 7 Open 8 Closed 9 Open 10 Open Processor Switch Settings Definition: Select processor speed settings. The switch positions may need to be changed when upgrading the processor (see table below). Resets the CMOS configuration to the default values. Set the switch to the closed position and restart the NetServer to reset the CMOS. Return the switch to the open position and restart the NetServer to return to normal operation. Clears the password. Set the switch to the closed position and restart the NetServer to clear the password. Return the switch to the open position and restart the NetServer to return to normal operation. Enable or disable space bar power-on. If you want to enable this feature, set this switch to Closed. If you want to disable it, set this switch to Open. This feature must also be configured in the BIOS using the SETUP utility. Clear system product code Reserved CPU Speed 233 MHz 266 MHz 300 MHz 333 MHz Switch 1 Open Open Open Open Switch 2 Open Open Open Open Switch 3 Open Closed Closed Closed Switch 4 Closed Open Open Closed Switch 5 Closed Open Closed Open Specifications Physical Dimensions Server* Height: 445 mm (17.5 in) Width: 191 mm (7.5 in) Depth: 451 mm (17.75 in) Weight: 14 Kg (30.8 lbs) Model 1* Environmental Specifications Operating altitude: Non-operating altitude: Operating temperature: Non-operating temperature (storage): Operating humidity: Non-operating humidity: Keyboard Height: 35 mm (1.4 in) Width: 467 mm (18.4 in) Depth: 198 mm (7.8 in) Weight: 1.9 mm (4.2 lbs) Keyboard mini-DIN cable: 3 meters (9.9 feet) 3046 m (10,000 ft) 12,200 m (40,000 ft) 5 degrees to 35 degrees C (41 degrees to 95 degrees F) -40 degrees to 70 degrees C (-40 degrees to 158 degrees F) 20 % to 80% relative humidity 5% to 95% relative humidity 61