HP LH4r HP Netserver Service Handbook, Volume 1 - Low End - Page 77
Hardware, Weight and Dimensions, Power Supply Specifications
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Hardware Processors Chipset Memory Video SCSI IDE LAN PCI Bus I/O CD-ROM Weight and Dimensions Weight Height Width Depth Intel Pentium II or III (up to 2 processors), supported speeds: 400, 450, and 500MHz. 512KB level 2 cache on processor. Intel 440BX AGPset with 66/100 MHz bus speed support. Supports up to four SDRAM DIMMS for a maximum total of 1GB. Supported DIMM types: 64MB, 128MB, or 256MB unbuffered, 72 bits wide, ECC single-bit correcting, multi-bit detecting. AGP slot (rev. 1.0 compliant) with bundled ATI Rage IIc AGP (Accelerated Graphics Port) video with 4MB SDRAM. Supports up to 1600x1200, 65K colors. AGP IRQ Enable/disable jumper is set to disable by default. Set to enable if DVD or other video application is used. Embedded Adaptec AIC-7895 Ultra/wide SCSI dual channel PCI controller. 40MB/s transfer rate, two 68-pin connectors. Embedded Ultra DMA/33 E-IDE dual channel PCI controller. Embedded Intel 82559 10/100 PCI Fast Ethernet Controller. Wake up on LAN enable/disable via BIOS setup. 32-bit, 33MHz speed. PCI rev. 2.1 compliant. Two Serial ports. One bi-directional parallel port with ECP/EPP high speed support. PS/2 style mouse and keyboard connectors. Bundled HP D4384A CD-ROM drive. IDE interface. 32x speed. Approx. 30 lbs (14 kg.), depending on configuration - excludes keyboard and monitor. 17.09 inches (434 mm) 7.1 inches (180mm) 11.67 inches (296.5mm) Feet opened 19.57 inches (497mm) Power Supply Specifications Type Input - Max. Range Operating Current In-rush Current Operating Power Auto-ranging 100 to 127 VAC ~5 A at 50/60 Hz 200 to 240 VAC ~ 2.85 A at 50/60 Hz 100 VAC: 5.3 A 120 VAC: 4.6 A 200/208 VAC: 3.2 A 220/230 VAC: 2.8 A 25 A 305 W 71