HP LaserJet 4100 HP PCL/PJL reference (PCL 5 Printer Language) - Technical Ref - Page 205
FT, Fill Type, No Parameters, Option1, Parameter, Format, Functional Range, Default, Description
View all HP LaserJet 4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
FT, Fill Type This command selects the shading pattern used to fill polygons (FP), rectangles (RA or RR), wedges (WG), or characters (CF). Use FT to enhance drawings using solid fill, shaded fill, parallel lines (hatching), cross-hatch, patterned (raster) fill, or PCL user-defined patterns. FT fill type[,option1[,option2;]] or FT [;] Parameter fill type option1, option2 Format Functional Range clamped 1-4, 10, 11, 21, 22 integer clamped type dependent* real Default 1 type dependent* *Refer to the table following the parameter descriptions. There are eight forms of fill types as shown above. The type parameter tells the printer which form you are using. If the fill type is specified, but the option1 and/or option2 parameter is omitted, values previously given for the specified fill type are assumed, or the defaults are assumed if none have been specified. z No Parameters - Defaults all FT parameters and sets the fill type to solid fill. Equivalent to (FT1). z Type - Selects the fill pattern. The table below lists the parameter values and corresponding fill types. z Option1, Option2 - The definition of these optional parameters depends on the type of fill selected. The following table lists the options available for each fill type. Table 22-5 Fill Type Description Option1 Option2 1 and 2 solid black ignored ignored 3 hatching (parallel spacing of lines angle of lines lines) EN FT, Fill Type 22-9