HP LaserJet 4100 HP PCL/PJL reference (PCL 5 Printer Language) - Technical Ref - Page 325
SR, Relative Character Size, distance P2Y - P1Y.
View all HP LaserJet 4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
SR, Relative Character Size This command specifies the size of characters as a percentage of the distance between P1 and P2. Use SR to establish relative character size so that if the P1/P2 distance changes, the character size adjusts to occupy the same relative amount of space. SR width height[;] or SR [;] Parameter Format Functional Range Default width clamped real -32768 to 0.75% of P2X-P1X 32767 height clamped real -32768 to 1.5% of P2Y-P1Y 32767 Note While the SR command is in effect (with or without parameters), changes in P1 and P2 affect the size of characters in the currently selected font. z No Parameters- Defaults the relative character width to 0.75% of the distance (P2X - P1X) and the height to 1.5% of the distance (P2Y - P1Y). z Width- Sets the character width to the specified percentage of the distance between the X-coordinates of P1 and P2. A negative width parameter mirrors labels in the right-to-left direction. Changing character size also changes the apparent stroke weight of labels; the printer adjusts characters relative to changes in P1/P2. As long as the aspect ratio remains the same with changes in P1/P2, characters will have the same appearance relative to the new P1/P2 rectangle. z Height- Sets the character height to the specified percentage of the distance between the Y-coordinates of P1 and P2. A negative height parameter mirrors labels in the top-to-bottom direction. EN SR, Relative Character Size 23-81