HP LaserJet 4100 HP PCL/PJL reference (PCL 5 Printer Language) - Technical Ref - Page 295
ES, Extra Space, No Parameters, Width, Height, Parameter, Format, Functional Range, Default
View all HP LaserJet 4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
ES, Extra Space This command adjusts space between characters and lines of labels without affecting character size. ES width[,height;] or ES [;] Parameter width height Format clamped real clamped real Functional Range -32768 to 32767 -32768 to 32767 Default 0 0 The printer interprets the parameters as follows: z No Parameters- Defaults the spaces and lines between characters to no extra space. Equivalent to (ES0,0). z Width- Specifies an increase (positive number) or decrease (negative number) in the space between characters. For maximum legibility, do not specify more than one extra space or subtract more than half a space. z Height- Specifies an increase (positive number) or decrease (negative number) in the space between lines. For maximum legibility, do not specify more than two extra lines, or subtract more than half a line. An ES command remains in effect until another ES command is executed, or until the printer is initialized or set to default conditions. Table 23-26 Example: Using the ES Command ECE EC%0B IN; Reset the printer. Enter HP-GL/2 mode. Initialize HP-GL/2 mode. SP1; Select pen number 1. Even though there is no physical pen, the SP command must be used to enable printing. EN ES, Extra Space 23-51