HP LaserJet 4100 HP PCL/PJL reference (PCL 5 Printer Language) - Technical Ref - Page 289
The label terminator WILL NOT print., Related Commands, Group, Character Plot CP command discussion.
View all HP LaserJet 4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
z Mode- Specifies whether the label terminator is printed. 0- The label terminator prints if it is a printable character and performs its function if it is a control code. 1- (Default) The label terminator does not print if it is a printing character and does not perform its function if it is a control code. A DT command remains in effect until another DT command is executed, or the printer is initialized or set to default conditions. The following command shows how to define and print using a non-printing label terminator: DT#;LBThe label terminator WILL NOT print.#; This command would print as: The label terminator WILL NOT print. This example shows how to define and use a printable label terminator: DT#,0;LBThe label terminator WILL print.#; This command would print as: The label terminator WILL print.# For another example using the DT command, see the example in the Character Plot (CP) command discussion. Table 23-23 Related Commands LB, Label TD, Transparent Data Group The Character Group EN DT, Define Label Terminator 23-45