HP LaserJet Enterprise MFP M430 LaserJet Enterprise MFP M430 M431 User Guide - Page 223
The printer is using incorrect link and duplex settings for the network
View all HP LaserJet Enterprise MFP M430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
4. If you installed the printer using the HP standard TCP/IP port, select the box labeled Always print to this printer, even if its IP address changes. 5. If you installed the printer using a Microsoft standard TCP/IP port, use the printer's hostname instead of the IP address. 6. If the IP address is correct, delete the printer and then add it again. 7. Reinstall the printer software and driver. The printer is using incorrect link and duplex settings for the network HP recommends leaving these settings in automatic mode (the default setting). If you change these settings, you must also change them for your network. New software programs might be causing compatibility problems Verify that any new software programs are correctly installed and that they use the correct print driver. The computer or workstation might be set up incorrectly An incorrectly configured computer can cause issues with printing. 1. Check the network drivers, print drivers, and the network redirection settings. 2. Verify that the operating system is configured correctly. The printer is disabled, or other network settings are incorrect Check the network settings. 1. Review the printer's configuration/networking pages to check the status of the network settings and protocols. 2. Reconfigure the network settings if necessary. Solve wireless network problems Check the following information to resolve wireless network issues. Introduction Use the troubleshooting information to help resolve issues. NOTE: To determine whether HP NFC, Wi-Fi, BLE, or other wireless printing capabilities are enabled on the printer, print a configuration page from the printer control panel. NOTE: If you have been experiencing intermittent loss of network connectivity, first update the printer firmware. For instructions on how to update the printer firmware, go to http://support.hp.com, search for your printer, and then search on "update the firmware." Wireless connectivity checklist Use the checklist to help resolve wireless connection issues. The printer is using incorrect link and duplex settings for the network 211