HP Latex 3100 Double-sided Day Night Kit User Guide - Page 12
Load the substrate roll for printing on the back side B
View all HP Latex 3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Load the substrate roll for printing on the back (side B) 1. Install the platen substrate protector. See Double-sided Day Night Kit platen substrate protector installation on page 9. 2. Disinflate the input spindle to loosen the roll. Open the spindle latches at both ends. 3. Remove the roll from the spindle, turn it around 180 degrees and replace it onto the spindle from the opposite end. Side B is now the substrate side facing up and exposed to be printed. NOTE: If your printer is an HP Latex 3000 printer series, what you see may be slightly different. 4. Reinflate the input spindle. 5. Feed the substrate through the substrate path and reattach it to the output spindle, aligning it correctly so as to be straight from input to output. 8 Chapter 1 HP Latex Double-sided Day Night Kit ENWW