HP Latex 3100 Double-sided Day Night Kit User Guide - Page 21

Replacement (3000 printer series) 1. If the edge holder is installed in the printer, remove it from the platen. 2. Remove the damaged strip from the ends of the edge holders. 3. Take one of the strips provided with the kit and attach the plastic end pieces to it. The soft surface should be face up and the roughened surface face down, to be in contact with the paper once the edge holder is installed in the printer. 4. Replace the edge holder on the platen, if you intend to use it. Clean Double-sided Day Night Kit lights Risk of burns Crush hazard Risk of trapped fingers Hazardous moving part For more safety information, see the printer's user guide Electric shock hazard After a long time using the Double-sided Day Night Kit, you are recommended to clean the lights and elements installed with the kit. Before cleaning the lights or other components, ensure that the printer is not printing and unload any loaded substrate, then turn off the printer in the correct way for maintenance operations.. ENWW Clean Double-sided Day Night Kit lights 17