HP ML310 ProLiant ML310 Generation 2 Server User Guide - Page 21
Server Operations, Powering Up the Server
View all HP ML310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
21 Server Operations In This Section Powering Up the Server...21 Powering Down the Server...21 Unlocking the Tower Bezel...22 Removing the Access Panel ...22 Powering Up the Server To power up the server, press the Power On/Standby button. Powering Down the Server WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power cord to remove power from the server. The front panel Power On/Standby button does not completely shut off system power. Portions of the power supply and some internal circuitry remain active until AC power is removed. IMPORTANT: If installing a hot-plug device, it is not necessary to power down the server. 1. Shut down the OS as directed by the OS documentation. 2. Press the Power On/Standby button to place the server in standby mode. When the server enters standby power mode, the system power LED changes to amber. 3. Disconnect the power cords. The system is now without power.