HP ML310 ProLiant ML310 Generation 2 Server User Guide - Page 40
If installing a new heatsink, remove the protective covering., Install the heatsink fan assembly.
View all HP ML310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 HP ProLiant ML310 Generation 2 Server User Guide CAUTION: To prevent possible server malfunction or damage to the equipment, be sure to completely close the processor locking lever. 4. Prepare the heatsink for installation: a. If reusing the heatsink, clean the bottom of the heatsink with the provided alcohol pad then apply a thin layer of thermal grease to the top of the processor. NOTE: HP recommends ShinEtsu G751 thermal grease compound for this server. b. If installing a new heatsink, remove the protective covering. 5. Install the heatsink fan assembly. 6. Tighten the four heatsink retaining screws.
40
HP ProLiant ML310 Generation 2 Server User Guide
CAUTION:
To prevent possible server malfunction or damage
to the equipment, be sure to completely close the processor locking
lever.
4.
Prepare the heatsink for installation:
a.
If reusing the heatsink, clean the bottom of the heatsink with the
provided alcohol pad then apply a thin layer of thermal grease to the top
of the processor.
NOTE:
HP recommends ShinEtsu G751 thermal grease compound for
this server.
b.
If installing a new heatsink, remove the protective covering.
5.
Install the heatsink fan assembly.
6.
Tighten the four heatsink retaining screws.